SKU Code: 0027780

Tuya Smart Wi-Fi Photoelectric Smoke Detector

360° All-round Inspection.

Quantity

       

€30.00   

In stock   

Stock in Birkirkara & Zejtun

Description

Silencing and testing
Silence: In the alarm state, press the "test" button to silence the buzzer, only the LED indicator flashes.
Test: In normal state, long press the "test" button for 2s to trigger the sound and light alarm, the alarm message is sent to the mobile APP.

WiFi and network configuration
Install the tuya Smart app on your smartphone the first time you use the detector.
Make sure your smartphone is connected to WiFi.
  • Launch the app, click "Add Device" --- "Security Sensor" --- "Sensor (WiFi) '/" Smoke (WiFi) ".
  • Press and hold the "Test" button for 5s until the LED flashes with a short beep of "di" (press and hold the button within 20 seconds after charging the battery to enter WiFi setup mode).
  • Click "OK" in the APP --- enter the password for WiFi, click "OK", the detector enters setup mode which lasts for 60s max.
  • LONG "di" beep with LED indicator on for 10s means the WiFi setup is complete. When the WiFi setup fails, the detector exits setup mode with a short 'Di Di' beep.
The WiFi configuration is based on the 3 steps above.
WiFi network status: When the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi.

Specifications

Specifications
Power supply: DC9V alkaline battery (not include 6LR61)
Static current: <10uA
Alarm current: <100mA
Working temperature: 0 ℃ ~ + 50 ℃
Humidity: ≦ 95% RH, no freezing
Alarm sound:> 80dB
Low battery alert: ≦ 7.0V ± 0.2V

Package Included:
1 x Detector (with battery)
1 x Instruction

Warranty and Returns Policy

SKU Code: 0027780

Tuya Smart Wi-Fi Photoelectric Smoke Detector

€30.00   

360° All-round Inspection.

Quantity

       

In stock   

Stock in Birkirkara & Zejtun

Description

Silencing and testing
Silence: In the alarm state, press the "test" button to silence the buzzer, only the LED indicator flashes.
Test: In normal state, long press the "test" button for 2s to trigger the sound and light alarm, the alarm message is sent to the mobile APP.

WiFi and network configuration
Install the tuya Smart app on your smartphone the first time you use the detector.
Make sure your smartphone is connected to WiFi.
  • Launch the app, click "Add Device" --- "Security Sensor" --- "Sensor (WiFi) '/" Smoke (WiFi) ".
  • Press and hold the "Test" button for 5s until the LED flashes with a short beep of "di" (press and hold the button within 20 seconds after charging the battery to enter WiFi setup mode).
  • Click "OK" in the APP --- enter the password for WiFi, click "OK", the detector enters setup mode which lasts for 60s max.
  • LONG "di" beep with LED indicator on for 10s means the WiFi setup is complete. When the WiFi setup fails, the detector exits setup mode with a short 'Di Di' beep.
The WiFi configuration is based on the 3 steps above.
WiFi network status: When the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi.

Specifications

Specifications
Power supply: DC9V alkaline battery (not include 6LR61)
Static current: <10uA
Alarm current: <100mA
Working temperature: 0 ℃ ~ + 50 ℃
Humidity: ≦ 95% RH, no freezing
Alarm sound:> 80dB
Low battery alert: ≦ 7.0V ± 0.2V

Package Included:
1 x Detector (with battery)
1 x Instruction

Warranty and Returns Policy